Nemos LP+
GSM/GPRS Datalogger
The NEMOS LP+ is a GSM-enabled, battery-powered data acquisition device specifically designed for operation in locations without access to mains electricity. It features eight digital inputs suitable for flow meters, four analog inputs, and a MODBUS RTU interface, providing a comprehensive solution for remote monitoring.
The NEMOS LP+ incorporates the latest narrowband communication technologies, NB-IoT and CAT.M1, while maintaining the 2G standard. This allows the device to communicate with the most prevalent networks currently available (2G) and prepares it for the future development of NB-IoT/CAT.M1.
Three power options are available: alkaline batteries, lithium batteries, or 12V power. The latter is ideal for solar-powered solutions, offering flexibility and sustainability.
Its robust and versatile design makes it particularly suitable for monitoring tanks, hydrants, and similar systems where mains electricity is unavailable but a wide range of inputs is required.
Characteristics
IMPROVEMENTS OVER PREVIOUS VERSION
Modbus RTU 485 / RS 232
Modem with 2G/NB-IoT/Cat.M1 technology
TECHNICAL SPECIFICATIONS
| GENERAL | |
|---|---|
| Battery capacity | Lithium battery pack 7,2 V / 28 Ah Alkaline battery pack 6 V / 10 Ah |
| IP RATING | IP67 |
| radio modem chipset | GSM / 2G / NB-IoT |
| Internal memory | >150.000 registers |
| Operating temperature | -20 ºC to +75 ºC |
| Antenna | 1/2 lambda dipole (removable) |
| Real-time clock | High accuracy + -2ppm automatic synchronization via NTP |
| Configuration and diagnostics | USB type B |
| Materiales exteriores | Policarbonate / ABS |
| ANALOG INPUTS | |
|---|---|
| Number | 4 |
| Type | 0-10 Vdc or 4/20 mA |
| Precision | 0.1 % |
| Resolution | 16 bits |
| Impedane | Voltage mode: 2 MOhm CUrrent loop mode: 125 Ohm |
| DIGITAL INPUTS | |
|---|---|
| Number | 8 |
| Sampling frequency | 64 Hz / 256 Hz |
| VOLTAGE POWER OUTPUTS | |
|---|---|
| Number | 4 |
| Type | 5 to 24 Vdc |
| Maximum output power | 1 W |
| Precision | 5% |
| COMMUNICATION BUS | |
|---|---|
| Type | MODBUS RTU / RS-485 |
| EXTERNAL POWER SUPPLY | |
|---|---|
| Optional | 4V to 15 V |
MODELS
| MODEL | Communication | Power supply |
|---|---|---|
| NLP+.W2G-NB.L | 2G/NB-IoT/LTE-M | Lithium battery pack 7,2v / 28AH |
| NLP+.W2G-NB.A | 2G/NB-IoT/LTE-M | Alkaline battery pack 6v / 10AH |
| NLP+.W2G-NB.E | 2G/NB-IoT/LTE-M | No battery, External power supply |
ACCESSORIES
THOR 2 /THOR 7
Two/seven valve latch pilot module. 12 VDC / 2-wire
Y200-LP
Low power ultrasonic sensor for non-contact water level measurement
EXCALIBUR M1
High-performance IP68 GSM antenna. Designed for operation in manholes and confined spaces.
STDV01 / STDV02
Probes for measuring ambient temperature and humidity
SONDA HLM-25S
Submersible hydrostatic probe for measuring the level of non-aggressive liquids in pressureless tanks, wells, tanks, etc.
VEGAPULS C11 / C21 / C22
Radar sensor for measuring the level of liquids and bulk solids
Ease of use and the use of the latest web technologies to offer an intuitive interface that is as secure as any online banking service are the most outstanding features of ZEUS, the online SCADA that Microcom makes available to its clients free of charge.
A simple web browser is all you need to access the service and start managing your facilities from anywhere. When you are out of the office, the ZEUSmobile mobile application available for iOS and Android facilitates, in addition to optimized access for phones and tablets, the reception of alarms using PUSH technology, making SMS obsolete in most cases.
ZEUS is not limited to visualization, it also allows the reconfiguration of remote stations without having to travel, the sending of orders or the management of users and stations. Integration into other platforms is guaranteed through the most common standards currently such as OPC UA and REST API.
TOOLS AND FEATURES
Complete reporting tool
Maximum security thanks to the most advanced web standards: HTTPs / SSL
Advanced user and privilege management
Easy data integration into other platforms using OPC UA and REST API
Receiving, managing and forwarding alarms
Remote configuration of Hermes and Nemos devices
Availability of the Zeus Synoptic Builder tool for creating synoptics.